1, oil absorption rate should be greater than 95%, using the same use enclosure installation guide.

　　2、風罩嵌入吊頂內,兩者之間設有不銹鋼裝飾板,用厚度1.2㎜的不銹鋼板制造,易拆卸,嵌入深度≥100㎜。

　　2, the wind cover embedded in the ceiling, stainless steel decorative plate is arranged between the two, manufacture, easy disassembly of stainless steel plate thickness of 1.2 mm, 100 mm above the embedded depth.

　　3、排煙罩清洗：我們把箅子(過濾網)取下放入專用容器中，加入金屬清洗劑浸泡，然后用高壓水槍沖洗干凈;煙罩表面的油污用清洗劑再使高壓水槍沖洗，然后清洗灶臺、墻面、煙罩上光亮劑、地面清潔。

　　3, hood cleaning: we put off the grate (filter) into special containers, adding metal detergent soak, then rinse with water cannons; hood surface oil cleaning agent for the first high-pressure water washing, then clean the stove, metope, hood, floor cleaning brightener.

　　5、圍護構造應配有鉸接式檢查門,以便于衛生清潔及察看。

　　5 the enclosure structure shall be equipped with hinged inspection doors for sanitary cleaning and inspection.

　　6、煙道清洗：大管道采用人工進入的方法徹底清洗。

　　6, flue cleaning: large pipes using artificial approach to clean thoroughly.

　　7、設備全部由不銹鋼制成,一切聯合處為防水、防蒸汽、防油煙。

　　7. The equipment is made of stainless steel, and all joints are waterproof, steam proof and smoke proof.

　　8、全部罩體用厚度大于1.0㎜的不銹鋼板制造.

　　8, all stainless steel cover plate with thickness greater than 1 mm.

　　9、油煙凈化器清洗：由經驗豐富的人員操作，使用除油劑浸泡。

　　9, soot purifier cleaning: experienced professionals operate, use highly effective degreasing agent immersion.

　　10、通風管用1.0鍍鋅板制成，設有不銹鋼鐵風量調理閥。

　　10. The ventilation pipe is made of 1 galvanized steel plate. It is equipped with stainless steel air conditioning valve.

　　11、照明設備是防濺,防水、內凹型的,散布于每1000㎜間隔，并應將一切電線套于導管中，用接駁箱銜接。照度安裝大于等于600lux,采用芝光管燈,統一的電力接口。

　　11, the lighting equipment is splash proof, waterproof, concave, scattered in every 1000 mm intervals, and should be set on all wire conduit, connection with connection box. The installation intensity greater than or equal to 600lux, the use of energy-saving Chicago neon lights, power unified interface.

　　12、 風罩豎板帶有一體環繞的自排安裝,排放槽易于清洗油煙、蒸汽,排放管為不銹鋼制,并聯風罩的全自動自清潔安裝。

　　Since the row, installation of 12 wind shield risers with integrated surround, discharge groove is easy to clean lampblack, steam discharge pipe, stainless steel, parallel to the wind hood automatic self cleaning installation.

　　本文的精彩內容來自濟南排煙罩詳細內容請點擊我們的網站: http://www.bjhgf.com/謝謝您的到來!

　　The exciting content of this article comes from the smoke hood of Ji'nan. Please click on our official website: http://www.bjhgf.com/, thank you for coming!

上一篇：風管穿越沉降縫時的注意事項
下一篇：單煙道式通風管道加工原理